Posts Tagged ‘engagement ring styles’

The cut of a diamond refers to the how many facets there are in the finished gemstone and how they are proportioned.  The skill and precision of the faceting affects the gemstone’s fire and sparkle, making it look dull or flash with fire.  The most common types of diamond cut are:

Round Brilliant -
This is also known as the Round cut, American Ideal cut and the American Standard cut.  The standard number of facets used in this cut is 57.  The top of the finished gemstone is a regular octagon, which is normally 56% of the diameter.  The recommended cut height for the diamond is 58% of the diameter, which breaks down into around 14% for the top part of the diamond, above the girdle, also called the crown, and around 43 for the pavilion, or lower part of the diamond.  These dimensions are mathematically calculated to give the maximum brilliance and scintillation, making the diamond flash with fire.

Round brilliants are the most popular cut of diamond and the number one choice for solitaires.

Princess -
Also known as the Square Modified Brilliant, this is a square variation of the Round Brilliant.  The table of the gemstone is again faceted into an octagon, but in such a way as to be nearly square. In contrast to the Round Brilliant, the depth of a Princess cut diamond is often 70-78% of the diameter.  It has 76 facets, which produce a large amount of sparkle, making it the second most popular choice for a solitaire ring.

Oval -
The Oval cut is elliptical, or egg shaped, when viewed from the top.  The length is ideally double the width of the gemstone, although this can vary depending on the proportions of the rough gem.  Oval cuts have 69 facets.  If done skilfully, Oval cut gemstones can have nearly as much scintillation and fire as Round Brilliants. 

Baguette -
This cut produces a rectangular gemstone and really only roughs which are this shape.  The faceting is done in steps, parallel to the edges and the base and table are square with triangular facets.  Baguettes have 20 facets.

Trillion -
Also known as Trilliants, this cut is based on a triangular shape and has 43 facets.  The corners are usually truncated but the tips and culet (bottom point) are typically pointed and thin making many jewelers reluctant to prong set trilliants. The culet is typically centered in the middle of the table when viewed from the top of the gemstone.  The overall geometry of this cut enables lots of fire and color to be seen making it especially suitable for light colored gemstones.

Marquise -
This is also called the Navette cut.  The 57 facets produce an elongated, pointed oval, in which the length is around twice the width.  This is a tricky cut because if it is made too shallow, the light will pass through the back of the gemstone and not be reflected back, reducing color and brilliance.  Well cut Marquises are flash with good color.

There are a number of other cuts, but in general they are based on the ones above.  For example, the Square, Octagon and Emerald cuts are all step cuts based on the Baguette cut.  The Heart cut is based the Brilliant Round and the Pear is a hybrid cut combining the best of the Oval and the Marquise.

Diamond engagement rings have a huge amount of emotional significance tied up in them. It is important to choose something that she will like, something that will stand the test of time and something that you know works well. So when the time comes for you to choose an engagement ring for your loved one, why not steal a head start by selecting from one of these three gorgeous cut and setting combinations?

Prong Solitaire Setting and Round Brilliant Cut Diamonds
This combination is the classic engagement diamond solitaire. The round brilliant is mathematically designed to give the most sparkle and brilliance of all cuts. It is one of the most efficient cuts, because the finished carat weight is maximised from the original diamond rough, making it good value too.

Prong setting is popular because the prongs can be easily adjusted to ensure they hold the gemstone in place. Typical prong settings have four, six or eight claws where extra security is needed! The claws allow a huge amount of light to pass into the gemstone, allowing the round brilliant to flash with beauty.

Trilogy Bezel Setting with Oval Cut Gemstones
A bezel setting is one where the gemstone is completely encircled by a trace of precious metal which holds the gemstone securely by its girdle. The setting adds height and dimension. Although this can be used for any shape of gemstone, it is harder to set those with angles and steps.

Oval cuts look wonderful in this setting because of their old world appeal which seems to echo the age old yet contemporary feel of the setting. And when set threefold in a oval cut trilogy, the setting and the cut combination is stunning.

Channel Setting and Baguette Cut Gemstones
Channel setting is a technique in which a long track of precious metal holds the gemstones securely by their girdles. This setting works especially well with Baguette Cut gemstones, because their straight sides means that they can be set directly next to one another and no metal appears between the gemstones. The effect is a breathtaking as the gemstones appear to float in a continuous river of diamond between the tracks of precious metal!